FD2L 2-Hour Fire-Rated Laundry and Garbage Chute Door for Walls

The FD2L is a 2-hour fire-rated access door built specifically for laundry and garbage chute openings in walls. It gives building staff quick, repeated access to chutes while maintaining a fire-rated barrier between floors.

The 1-3/4" flange covers the opening edges on installation, and the continuous stainless steel piano hinge opens the door panel to a full 180°, clearing the opening completely for chute access. The door panel also self-closes and latches after each use, as required by NFPA 80.

Intertek Warnock Hersey lists and labels the FD2L for a 2-hour fire rating for vertical installation, so it meets fire separation requirements at laundry and garbage chute openings without adding a separate fire-rated assembly.

Why Do Contractors Specify FD2L 2-Hour Fire-Rated Laundry and Garbage Chute Door?

• Built for chute access: The 1-3/4" flange covers rough opening edges, and the door panel swings to a full 180°, so nothing obstructs the chute opening when staff need access.
• Automatic self-closing: A built-in closer pulls the door shut and latches it after each use per NFPA 80, so the fire barrier remains intact without relying on staff to close it manually.
• 2-hour fire rating for wall installations: Intertek Warnock Hersey lists and labels the FD2L for vertical installation, covering the fire separation requirement at laundry and garbage chute openings.
• Optional smoke gasket: A smoke gasket is available for projects where smoke control at the chute opening is required, tested to UL 1784 per NFPA 105, ASTM E152, CAN4 S106, UBC 7-2, and UL 10(b) NFPA 252 (90-minute).
• Two material options: Available in satin finish galvannealed steel or 304 stainless steel with a #4 polished finish, depending on the environment and finish requirements.

Ready to order? Request a quote for the FD2L to confirm your size, material, latch configuration, and lead time for your project.

Key Product Specifications

• Fire rating: 2-hour, Intertek Warnock Hersey Listed and Labeled; vertical installation only
• Application: Wall installations only
• Testing standards: NFPA 252, UL 10B, CAN/ULC S104
• Temp rise: 139°C/250°F at 30 min; 250°C/450°F at 60 min
• Materials: Satin finish galvannealed steel or 304 stainless steel
• Finish: Rust-inhibitive off-white prime coat (standard) or #4 polished stainless steel finish
• Frame: 16 ga (1.61mm) steel with mounting holes; depth 2-3/4" (70mm)
• Flange: 1-3/4" (45mm) wide with 3/8" (9.52mm) return
• Door panel: 18 ga (1.31mm) with 22 ga (0.85mm) liner; 1-1/2" (38mm) high temperature insulation
• Hinge: Continuous stainless steel piano hinge; opens to 180°; placed on long side (H dimension) unless otherwise specified
• Panel closer: Listed concealed door closure; self-closes and latches per NFPA 80
• Standard latch: Non-locking chrome "T" handle
• Clear opening: Width minus 1-1/4" (39mm); height minus 1-1/4" (39mm)
• Size range: Made to order; minimum 16" x 16"; maximum 30" x 30"
• Optional smoke gasket standards: UL 1784 per NFPA 105, ASTM E152, CAN4 S106, UBC 7-2, UL 10(b) NFPA 252 (90-minute)

What Comes Standard and What Can Be Configured?

Every FD2L ships with the following as standard:

• 16 ga galvannealed steel frame with mounting holes
• 18 ga door panel with 22 ga liner and 1-1/2" high temperature insulation
• 1-3/4" flange with 3/8" return
• Continuous stainless steel piano hinge (opens to 180°)
• Listed concealed door closure (self-closes and latches per NFPA 80)
• Non-locking chrome "T" handle
• Rust-inhibitive off-white prime coat finish

The following options must be specified at the time of order and are not included as standard:

• 304 stainless steel construction with #4 polished finish
• Mortise lock (MPI)
• Interior latch release
• Smoke gasket (for smoke control applications)
• Hinge side placement other than the long side (H dimension)

What Should You Confirm Before Ordering FD2L?

• Size: The FD2L is made to order. Confirm your required door size falls between 16" x 16" (minimum) and 30" x 30" (maximum).
• Installation surface: The FD2L should be installed on walls. The 2-hour fire rating applies only to vertical installations. It’s not rated for ceiling applications.
• Hinge side: The hinge is placed on the long side (H dimension) as standard. If a different placement is needed, specify this before ordering.
• Latch or lock: The standard latch is a non-locking chrome "T" handle. If a mortise lock is required, specify this at the time of order.
• Interior latch release: If access from inside the chute side is needed, specify the interior latch release option before ordering.
• Smoke gasket: If your project requires smoke control at the chute opening, specify the smoke gasket option.
• Material: Confirm whether galvannealed steel or 304 stainless steel is required for the environment. Stainless models ship with a #4 polished finish.
• Production lead time: Lead time depends on your configuration and size. Request a quote to confirm production and ship dates.

Installation Notes

• The rough opening equals the order size (H = hinge side).
• The flange covers the opening edges on installation, with a 1-3/4" width and 3/8" return.
• The concealed door closure self-closes and latches the door after use. No manual latching is required.
• Open the door with the chrome "T" handle. If a mortise lock is ordered, use the corresponding key or handle.
• Lining of the stud is not required for up to a 1-hour application.

Who Specifies FD2L and Where Is It Used?

Contractors, facility managers, and building owners specify the FD2L where a fire-rated chute access door is required in a wall. The self-closing latch and 2-hour fire rating make it a standard specification for laundry and garbage chute openings in commercial and multifamily buildings.

Common applications include:

• Hotels and hospitality: Laundry chute access on each floor, allowing housekeeping staff to send soiled linens, towels, and bedding directly to the laundry facilities without using elevators.
• Multifamily residential buildings: Garbage chute doors on each floor in corridors and utility rooms.
• Banquet halls and catering facilities: Laundry chute access for tablecloths and uniforms in high-volume linen operations.
• Commercial and institutional buildings: Garbage chute access in maintenance corridors where a fire-rated barrier at the chute opening is required by code.

Not sure if the FD2L is the right fit? Browse our full catalogue of fire-rated access doors to compare models.

Frequently Asked Questions

1. What is the clear opening of FD2L?
The clear opening is the order size minus 1-1/4" on both the width and height. For example, an 18" x 24" door gives a clear opening of 16-3/4" x 22-3/4".

2. Can FD2L be installed on a ceiling?
No. The FD2L is rated for vertical (wall) installation only. The 2-hour Intertek Warnock Hersey listing does not cover horizontal or ceiling installations.

3. Can I add a lock to FD2L?
Yes. The standard latch is a non-locking chrome "T" handle. A mortise lock (MPI) is available as an option and must be specified at the time of order.

4. Is a smoke gasket available?
Yes. A smoke gasket is an optional add-on for projects requiring smoke control at the chute opening. It adds coverage to UL 1784 per NFPA 105, ASTM E152, CAN4 S106, UBC 7-2, and UL 10(b) NFPA 252 at 90 minutes.

5. What sizes are available?
The FD2L is made to order, with a minimum size of 16" x 16" and a maximum of 30" x 30". Custom sizes are available on request.

Why Buy FD2L From Access Doors and Panels?

Access Doors and Panels confirms your size, material, latch configuration, and production lead time before you place an order. The FD2L is made to order, so every unit is sized to your exact chute opening. Custom sizes are available fast within the 16" x 16" to 30" x 30" range.

Have any questions? Contact our team or call +1-888-327-5471 to confirm specifications, compare latch and smoke gasket options, and get sizing guidance.

Need a custom size? Request a custom quote to get the FD2L manufactured to your exact dimensions.