16" x 16" Fire-rated Recessed Flange - For Walls and Ceilings - JL Industries

Access panel for 2 hour wall or ceiling applications that require a trimless appearance and a recessed door to accept tile or wallboard insert. Wallboard is installed over the mounting flange leaving only a 1/8” bead around the door surface.

This model of wall and ceiling fire-rated panels is manufactured under the factory inspection service of Intertek Warnock Hersey) and have a label reading: “Listed access frame and insulated fire door assembly 2 hour fire rating. Vertical and Horizontal Installation.”

Product Submittal/Spec sheet: 

Door size:
12" x 12"
Materials:
Painted galvanized steel or 304 stainless steel.
Frame:
16 ga (1.61mm) steel. Depth 1-1/4” (32mm).
Mounting Flange:
Concealed flange is recessed 5/8” from face of frame to allow for wallboard installation on top. Flange is 1-1/4” (32 mm) W.
Door Panel:
18 ga (1.31mm). Liner - 22 ga (0.85mm). Face of door is recessed 5/8” inch to accept tile or wallboard insert.
Insulation:
1-1/2” (38mm) of high temperature insulation material.
Finishes:
Electrostatically applied rust inhibitive prime coat or a No. 4 polished stainless steel finish on exterior surface.
Hinges:
Continuous piano hinge allows the door panel to open 175° for easy access. The hinge is placed on the long side of the door (“H” dimension) unless otherwise requested.
Panel Closer:
Automatic panel closer will close and latch the door from an open position of approximately 90° as required by code.
Latch:
The standard factory installed latch is a flush mount 1/4” allen key. All fire-rated locks are self-latching and include an interior latch release mechanism allowing the doors to be opened from the inside.
Excellent Services

REQUEST MORE INFO ABOUT THIS PRODUCT

JL Industries 16 x 16 Fire-rated Recessed Flange - For Walls and Ceilings - JL Industries
SKU # FD2CT-16-16

16" x 16" Fire-rated Recessed Flange - For Walls and Ceilings - JL Industries

CONTACT US AT 1-800-609-2917