24" x 24" Galvanized Security Roof Hatch


Acudor Security Roof Hatches are designed to provide convenient, economical access to the roof of a building while adding an additional level of security. The heavy gauge materials used to manufacture this hatch are ideal for applications in banks, prisons, hospitals, and more.


Features RHG-SEC

  • Weather tight construction
  • Convenient one-hand operation
  • 12" high insulated curb Supports
  • 40lbs./sq. ft. live load


Optional Features RHG-SEC

  • Stainless Steel cover, curb, and/or hardware
  • Aluminum Material
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • Higher curb heights for "green roof" applications


Product Specifications:

Door Size:
24" wide x 24" high
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a liveload of 40lbs./sq. ft.,
10 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Heavy duty galvanized steel pintle hinges with 3/8" pin
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch:
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Heavy duty detention lock with paracentric key. Unit also has inside and outside padlock provisions.
Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel paint.
Excellent Services


Acudor 24 x 24 Galvanized Security Roof Hatch - Acudor
SKU # RHG-SEC-24-24

24" x 24" Galvanized Security Roof Hatch - Acudor

CONTACT US AT 1-800-609-2917