24" x 24" Galvanized Domed Roof Hatch


Acudor Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. The Polycarbonate Domes provide the benefit of a skylight.

Features RHGDD

  • Clear, bronz, white, combination polycarbonate double-skin dome

Optional Features RHGDD

  • Stainless Steel cover, curb, and/or hardware
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • All Aluminum construction, cover and curb


Product Specifications:

Door Size:
24" wide x 24" high
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft.
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Heavy duty galvanized steel pintle hinges with 3/8" pin
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch:
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
(Curb) Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint, (Cover) Mill finish.
Excellent Services


Acudor 24 x 24 Galvanized Domed Roof Hatch - Acudor
SKU # RHG-DD-24-24

24" x 24" Galvanized Domed Roof Hatch - Acudor

(You save $675.52 )