×
Categories

30" x 36" Galvanized Domed Roof Hatch - Acudor

Need another size? Click here
$1,607.69
(— You save $321.54 )
SKU:
RHGDD-30-36
Availability:
Contact Us
  • 30" x 36" Galvanized Domed Roof Hatch - Acudor
  • 30" x 36" Galvanized Domed Roof Hatch - Acudor

Questions?

Speak with ourAccess Door product experts who will assist you with all your product and shipping needs!

1-800-609-2917
Frequently bought together:
Downloads

Product Details

30" x 36" Galvanized Domed Roof Hatch

Application

Acudor Domed Roof Hatches are designed to provide convenient, economical access to the roof of a building. The Polycarbonate Domes provide the benefit of a skylight.

Features RHGDD

  • Clear, bronz, white, combination polycarbonate double-skin dome

Optional Features RHGDD

  • Stainless Steel cover, curb, and/or hardware
  • Louvered Curbs
  • Curb Mounted Units
  • Curb pitch corrected for sloped roof
  • All Aluminum construction, cover and curb

 

 

Product Specifications:

Door Size:
30" wide by 36" high
Cover:
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft.
Curb:
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge:
Heavy duty galvanized steel pintle hinges with 3/8" pin
Opening:
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch:
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish:
(Curb) Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint, (Cover) Mill finish.
View AllClose

Specifications

Door Size:
30" wide by 36" high
Cover:
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft.
Curb:
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Hinge:
Heavy duty galvanized steel pintle hinges with 3/8" pin
Opening:
Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover.
Door Latch:
Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions.
Finish:
(Curb) Material is prepared with an iron phosphate wash, followed by a rust inhibiting primer, and then a baked on polyester enamel grey paint, (Cover) Mill finish.
View AllClose

REQUEST MORE INFO ABOUT THIS PRODUCT