3541 848 9A

3541 848 9A

At some point, your contractors may need the Milcor Galvanized Steel Domed Skylight to install it on the roof of your industrial buildings. Installing this is also critical to let the smoke out in the event of a building fire.

You can find that this domed skylight has a Polyurethane Foam Gasket adhered to the entire perimeter of the curb, Torsion Coil Spring operators to open against a 10 psf snow or wind load, and hydraulic dampers to control cover opening speed and prevent overtravel. All of its hardware is zinc plated too (stainless steel hardware optional).

NOTES:
*LISTED BY UNDERWRITERS LABORATORIES (UL 793)
*RATED TO OPEN AGAINST 10 PSF SNOW/WIND LOAD
*RATED TO REMAIN CLOSED AGAINST 30 PSF UPLIFT LOAD
*25 FT OF CABLING PROVIDED FOR INTERIOR RELEASE

Our world-class customer service team looks forward to discussing all your roof hatch needs today! Feel free to contact us at 1-800-609-2917or by email via [email protected]

At some point, your contractors may need the BRH-UL-SEE Galvanized Steel Domed Skylight - Milcor to install it on the roof of your industrial buildings. Installing this is also critical to let the smoke out in the event of a building fire.

You can find that this domed skylight has a Polyurethane Foam Gasket adhered to the entire perimeter of the curb, Torsion Coil Spring operators to open against a 10 psf snow or wind load, and hydraulic dampers to control cover opening speed and prevent overtravel. All of its hardware is zinc plated too (stainless steel hardware optional).

Specifications:

Material:

UL-SEE: 16 gauge galvanized steel

UL-SEEA:.090 aluminum

Finish:

Galvanized Steel: Mill Finish

Aluminum: Mill Finish

Cover: 

Damage resistance, light admitting, 1/8” polycarbonate outer dome with 1/8” polycarbonate inner dome, surrounded by an extruded aluminum frame.

Curb:

13 ½” in height with 3 ½” pre-drilled mounting flanges and counterflashing with 1” thick exterior fiberboard insulation

Gasket: 

Polyurethane Foam Gasket adhered to the entire perimeter of the curb

Hinges: 

Steel Pintle Hinge

Springs:

Torsion Coil Spring operators to open against a 10 psf snow or wind load 

Dampeners:

Hydraulic dampeners to control cover opening speed and prevent over-travel

Latches:

Latch designed to open automatically with a parting of single 360 degrees fusible link or manually with interior and exterior pull release handles without disturbing the fusible link. Designed to hold covers closed when subjected to 30 psf uplift pressure

Hardware: 

All hardware is zinc plated (stainless steel hardware optional)

Our world-class customer service team looks forward to discussing all your roof hatch needs today! Feel free to contact us at 1-800-609-2917 or by email via [email protected]