Downloads
Product Details
10" x 10" Surf Access Doors
SF series Access Doors are designed for surface installation on drywall, masonry or thin-coat plaster. Door features rounded safety corners and is attached to the frame with a continuous piano hinge allowing a 175mm opening
Rough Opening Size: |
N/A
|
Material: |
14 gauge galvanneal steel
|
Lock / latch: |
Screwdriver Operated Cam Latch
|
Flange: |
¼" flange with pre-drilled holes in each corner
|
Hinge: |
Continuous piano hinge
|
Finish: |
Prime coat suitable for painting
|
Recommend Products
10" x 10" Drywall Access Door - Elmdor
$22.02
10" x 10" Drywall Access Door DW series access doors are ideally suited for new installations or for remodeling, in masonry, tile, wood or other wall and ceiling surfaces. Door features rounded...
10" x 10" Surface Access Door - Elmdor
$28.06
10" x 10" Surf Access Doors SF series Access Doors are designed for surface installation on drywall, masonry or thin-coat plaster. Door features rounded safety corners and is attached to the frame...
10" x 10" Duct Access Door - Elmdor
$26.62
10" x 10" Duct Access Door DT series access doors are designed to provide access to equipment installed within ducts. The door panels are insulated and gaskets between the panel and frame will assure...
Elmdor Surface Access Doors SF 18" x 18"
$63.13
18" x 18" Surf Access Doors SF series Access Doors are designed for surface installation on drywall, masonry or thin-coat plaster. Door features rounded safety corners and is attached to the frame...
Elmdor Surface Access Door SF 8" x 8"
$25.54
8" x 8" Surf Access Doors SF series Access Doors are designed for surface installation on drywall, masonry or thin-coat plaster. Door features rounded safety corners and is attached to the frame with...