8" x 8" Self-Stick HVAC Duct Access Door for Sheet Metal Duct - BEST

8" x 8" BA-SSHD Self-Stick HVAC Duct Access Door for Sheet Metal Duct

Are you frustrated with the mess of sealing ductwork? You're not alone. Mistakes and air leaks can be annoying. But what if sealing ducts could be easier? Meet the BA-SSHD. 

The BA-SSHD is a self-adhesive access door that simplifies HVAC duct installation. Just press it onto the duct opening for a clean, airtight fit—no messy sealants required. 

Made of strong 24-gauge galvanized steel, the BA-SSHD has a double-panel design with 1-inch fiberglass insulation. This helps reduce air leaks and keep temperatures stable. It can handle up to 10 inches of static pressure for a tight seal. 

Installation is easy with its lightweight design and self-tightening cam latches, which ensure secure closure every time. 

Why Should You Choose the BA-SSHD?

• Quick and Clean Installation: The self-adhesive frame and pre-applied gasket make setup quick and tidy. Forget messy sealants like tape or mastic—this design keeps the process simple and efficient. 
• Better HVAC Efficiency: The 1-inch fiberglass insulation and dual-gasketing system create a strong airtight seal that reduces energy loss, helping your HVAC system work better. 
• Easy Duct Access: The hinge-less design makes it straightforward to access the inside of the ducts for maintenance and repairs. 
• Strong and Rust-Resistant: Made from 24-gauge galvanized steel, it resists rust and handles tough duct conditions, ensuring it lasts. 
• Save Time and Money: Easy installation, better HVAC efficiency, and simple maintenance will cut labor costs and lower long-term expenses. Choosing this product is a smart investment in efficiency and savings. 

When standard options don’t work, you need custom solutions for your project. We make custom access doors and panels to fit your exact needs. Don’t settle for poor quality or mismatched solutions. Call us at 1-888-982-9434 today to get your custom access doors!

Product Specifications

• Dimensions: 8" x 8"
• Application: Provides easy access to sheet metal HVAC ducts for maintenance, inspection, and equipment passage. 
• Type: Self-stick duct access panel (no hinge - fully removable). 
• Design: Insulated door panel, double cam. 
• Pressure Rating: Tested to 10" SP (static pressure) with minimal leakage. 
• Door: 24-gauge galvanized steel, double-panel construction. 
• Frame: 24-gauge galvanized steel. 
• Insulation: Door panel filled with 1" fiberglass insulation. 
• Between Door and Frame: 1/8" thick by 1/2" wide closed-cell neoprene gasketing. 
• Between Frame and Duct (Self-Stick): A 1/8" thick by 1 1/2" wide adhesive-bonded gasket provides a tight, self-stick seal. 
• Latch: Self-tightening, hand-operated cam latches. 
• Latch Quantity: Varies by size (e.g., two latches for smaller sizes like 6"x6" to 12"x12"; 4 latches for larger sizes like 14"x14" to 24"x24"). 
• Hardware: Hex head sheet metal screws. 

If you're tired of messy sealants and wasted time, improve your duct access with the BA-SSHD for a cleaner, more efficient HVAC system. Call +1-888-982-9434 today for your next project!