12" x 12" Airtight / Watertight Panel - Prime Coated - Acudor

12" x 12" Airtight / Watertight Access Door - Prime Coated - Acudor

The ADWT is a flush access door that has been tested for air infiltration and water penetration. The Door and frame are fully welded and gasket-ed. This access door is ideal for use in laboratories, clean rooms, operating rooms, etc. where an airtight/watertight seal is required.

Product Features:

ADWT is a flush access door that has been tested for air infiltration and water penetration

Door and Frame fully welded

Continuous Bulb Trim Gasket

Continuous Piano Hinge

Air Infiltration : less than 0.01 cubic foot per minute/square foot 

Water Penetration : no leakage at 15.05 pounds per square foot

Product Spec Sheet:
Door Size:	12" wide by 12" tall
Rough Opening Size:	12 ⅜" wide by 12 ⅜" tall
Material:	16 gauge steel
Lock/Latch:	Stainless Steel Screwdriver Operated Cam Latch
Flange:	1⅜" flange
Hinge:	Continuous exposed piano hinge
Finish:	5 stage iron phosphate with prime coat of White alkyd baked-on enamel