24" x 24" Galvanized Steel Smoke Vent - Acudor
Downloads
Product Details
24" x 24" Galvanized Steel Smoke Vent - Acudor
Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent reaches a certain temperature.
Door Size: |
24" wide x 24" high
|
Rough Opening Size: |
N/A
|
Material: |
14 gauge galvanized steel
|
Lock/Latch: |
Fully enclosed compression spring operators allow cover to open against 10-lbs./sq. ft. wind or snow load when released.
|
Hinge: |
Steel butt hinges with brass pin
|
Finish: |
Galvanized steel: prime painted with rust-inhibiting grey primer
|
Product Spec PDF: |
|
Recommend Products
24" x 24" Galvanized Roof Hatch - Acudor
$933.04
24" x 24" Galvanized Roof Hatch - Acudor RHG Galvanized Roof Hatches are designed to provide convenient, economical access to the Roof of a building. Our hatches are designed with safety, durability...
On Sale
24" x 36" Aluminum Smoke Vent - Acudor
Was:
$1,361.99
Now:
$1,361.90
24" x 36" Aluminum Smoke Vent - Acudor Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent reaches...
On Sale
24" x 24" Aluminum Smoke Vent - Acudor
Was:
$1,341.99
Now:
$1,341.90
24" x 24" Aluminum Smoke Vent - Acudor Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent reaches...
Acudor SVG Galvanized Steel Smoke Vent
$989.99 - $1,254.99
Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent reaches a certain temperature. (165 degree)
On Sale
24" x 36" Galvanized Steel Smoke Vent - Acudor
Was:
$1,259.99
Now:
$1,049.90
24" x 36" Galvanized Steel Smoke Vent - Acudor Acudor Smoke Vents release heat, smoke and noxious gases during a fire. Each vent is designed to automatically open when a fusible link inside the vent...