20" x 20" Drywall Inlay Access Panel with Fully Detachable Hatch

F3 - Aluminum frame, with drywall inlay, for drywall partitions

The access panel consists of a welded aluminum frame and is available with or without 1/2" (12.7 mm)  or 5/8" (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches).
Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12" x 12" (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed.
The reveal of 1/16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side.
This access panel is designed for tiling applications.

download-button.jpg left-arrow.pngDownload Technical Data / Submittal Sheet (F3)

Special advantages

  • Superior engineering & innovative design
  • Fast delivery
  • Quick and easy installation
  • Solid aluminum frame
  • Flush installation in ceilings and walls
  • Available in moisture resistant, mildew resistant and cement board


Customized solutions

Customized sizes can be produced in every dimension upon request. (Request a Quote)


For Wall Installation Only

Door Size:
20" wide x 20" high
Excellent Services


FF Systems 20 x 20 Drywall Inlay Access Panel for Tiling
SKU # F3-20-20-58-R

20" x 20" Drywall Inlay Panel for Tiling - FF Systems

(You save $19.89 )