Airtight and Watertight

Access Doors and Panels’ airtight and watertight wall access panels are perfect for use in high-sensitive areas. Our products are tested for air infiltration and water penetration and thus capable of providing protection against damage and degradation. 

Our special line of products is ideal for use in cleanrooms, laboratories, and operating rooms. Do you prefer prime coated? Or perhaps you can’t live without stainless steel? Access Doors and Panels offers these two material options from Acudor!

Using our ADWT flush wall access panels where an airtight and watertight seal is required, is the ideal solution. If you prefer something practical, this door is perfect with its fully welded door and frame along with its continuous bulb trim gasket and continuous piano hinge. Its air infiltration is less than 0.01 cubic feet per minute/square foot with no leakage at 15.05 pounds per square foot.

The ADWT-SS finished with #4 satin polish is made of Stainless Steel: Type 304 and can be equipped with a stainless Steel Phillips head screws standard; while our ADWT-PC has special features of 16 gauge steel, 5 stage iron phosphate with prime coat of White alkyd baked-on enamel and a stainless steel screwdriver-operated cam latch. These wall access panels are both available and ready to ship!

If you want to experience outstanding results when it comes to airtight/watertight wall access panels, order from Access Doors and Panels! Call us for orders and inquiries at (800) 609-2917.