5'0" x 11'0" - Double Leaf Equipment Access Hatch - Aluminum Cover, Galvanized Curb - Milcor

5'0" x 11'0" - Double Leaf Equipment Access Hatch - Aluminum Cover, Galvanized Cover

Specifications:

• Material:
• RB:    14 gauge galvanized steel cover and curb
• RC:     .090 Aluminum cover and 14 gauge galvanized steel curb
• RD:     .090 Aluminum cover and curb
• Finish:

• Galvanized Steel: Cool White Water Based Enamel Paint 
• Aluminum: Mill Finish
• Cover: covers open easily to 90 degrees

• RB:  High-strength composite panels with 14 gauge galvanized steel exterior with 22 gauge galvanized steel liner with 1” fiberglass insulation.
• RC & RD:   Mill finish .090 aluminum exterior with .063 aluminum liner with 1” fiberglass insulation.
• Curb:

• RB & RC: 14 gauge galvanized steel with a 12” high curb, integral counterflashing, 3-1/2” wide mounting flanges with pre-drilled holes and 1” exterior fiberboard insulation
• RD: Mill finish.090 aluminum with a 12” high curb, integral counterflashing, 3-1/2” wide mounting flanges with pre-drilled holes and 1” exterior fiberboard insulation

• Gasket: 
• Extruded EPDM rubber gasket adhered to cover
• Hinges: 
• Steel Pintle Hinge
• Lift Assist:
• Cover operation is assisted by enclosed heavy-duty Torsion Coil Spring
• Latches:
• Two-point slam latch system for tight, secure closure with interior and exterior handles and an inside padlock hasp.
• Hardware: 
• All hardware is zinc plated (stainless steel hardware optional)
• Load Capacity:
•  40 psf

Product Spec Sheet:
Material:	Galvanized Steel