18" x 18" Drywall Inlay Access Panel for Exterior Facade
MPL - Access panel for stucco
The access panel consists of aluminum profiles, a sheet steel insert with expanded metal and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process.
The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of 3 mm is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust-proof) and, in addition, with a special joint (water resistant). Access panels for facades in the outer area are applicable for direct mounting onto solid walls (without external wall insulation system) or for installation into a wall insultion system (foam-sealed) from an insulation thickness of 80 mm
Special advantages
- Economical solution
- Delivery at short notice on request
- Easy and quick installation
- Solid aluminum frame
- Sophisticated solution
- Flush installation in facades
Customized solutions
Customized sizes can be produced in every dimension upon request. (Request a Quote)
Product Spec Sheet: |
|
Door Size: |
18" wide x 18" high
|
Rough Opening Size: |
18 3/8" x 18 3/8"
|
Material: |
Galvanized Steel
|
Finish: |
Galvanized Steel"""
|
Flange: |
3 wide metal lath"
|
Hinge: |
Concealed pivot rod
|
Lock / latch: |
3 x Screwdriver Operated Cam Latches
|
Cross Reference: |