60" x 96" Galvanized UL Listed Smoke Vent - Double Leaf - Acudor


Acudor Smoke Vents are designed to provide an economical solution for fire ventilation by removing deadly smoke, heat, and gases from a burning building. Single leaf Smoke Vents are used for smaller areas that need venting, including elevator shafts and stairwells. Single leaf units are not U.L. Listed.

Features SVG

  • 14 gauge G90 Galvanized Steel

  • 12" high insulated curb

  • UL Listed Fusible or McCabe Resettable Links

  • Inside and Outside manual release

  • High performance gas springs

Optional Features SVG:

  • Curb mount or Metal Building Flange

  • Double-Dome Co-Polyester lids for daylighting

  • Louvered curb for ventilation

Product Submittal/Spec sheet: 

Door Size:
60" x 96"
Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weather/draft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs./sq. ft.
14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes.
Heavy duty galvanized steel / aluminum pintle hinges with 3/8" pin
Gas spring operators allow cover to open and close with ease. Inside and outside release allows for manual lid operation.
Door Latch:
Self latching Slam Latch. Supplied standard with 165° UL Listed Fusible Link. Resettable McCabe link available.
Galvanized Steel: baked on polyester enamel paint
Excellent Services


Acudor 60 x 96 Galvanized UL Listed Smoke Vent - Double Leaf - Acudor
SKU # SVG-DL-60-96

60" x 96" Galvanized UL Listed Smoke Vent - Double Leaf - Acudor

(You save $549.50 )