1-800-609-2917
36" x 30" - Steel Roof Hatch - VersaMount Ladder Access - Bilco
- SKU:
- S-20VM-96-30
- Lead Time:
- 2 Weeks
$1,831.41
$1,308.15
(You save
$523.26
)
36" x 30" - Steel Roof Hatch - VersaMount Ladder Access
The VersaMount replacement hatch allows you to replace a damaged roof hatch without re-roofing. Simply remove the cover from the damaged hatch and place the Versamount hatch on top of the existing curb. The low-profile VersaMount curb features a built-in flange and apron and innovative anchor clip system to ensure a fast, secure, and weathertight installation. Available in a number of standard sizes.
Standard Features and Benefits
-
Built-in apron simplifies installation on existing curbs and ensures watertightness
-
Engineered with compression spring operators to provide smooth, easy, one-hand operation, regardless of size
-
Automatic hold-open arm locks the cover in the open position to ensure safe egress
-
Overlapping cover design, full welded corners on cover and curb, EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency
-
Constructed with corrosion resistant materials to provide many years of trouble free, dependable service
-
Heavy gauge construction and positive latching mechanism maintain building security
-
Available in many sizes and curb configurations to satisfy any requirement or installation
Guide Specifications
-
Material (select one): Steel: Cover and frame are 14 gauge (2 mm) G-90 paint bond galvanized steel. Aluminum: Cover and frame are 11 gauge (2.3 mm) aluminum. Stainless Steel: Cover and frame are 14 gauge (2 mm) type 304 stainless steel.
-
Cover: Brakeformed, hollow-metal design with 1" (25 mm) concealed fiberglass insulation, 3" (76 mm) beaded, overlapping flange, fully welded at corners, and internally reinforced for 40 psf
(195 kg/m2) live load. -
Curb: 4" (102mm) in height, breakformed hollow-metal design with 1" (25 mm) concealed fiberglass insulation, 2-5/8" (67 mm) mounting flange and 1-1/2" (38 mm) apron, fully welded at corners. Stainless steel anchor clips are included.
-
Gasket: Extruded EPDM rubber gasket permanently adhered to the cover.
-
Hinges: Heavy-duty pintle hinges with 3/8" (9 mm) type 316 stainless steel hinge pins.
-
Latch: Slam latch with interior and exterior turn handles and padlock hasps.
-
Lift Assistance: Compression spring operators enclosed in telescopic tubes. Automatic hold-open arm with grip handle release.
-
Finish: Steel: Alkyd base red oxide primer. Aluminum: Mill Finish. Stainless Steel: Type 304 stainless steel with bead blast finis
-
Hardware:
Steel: Engineered composite compression spring tubes and steel compression springs packed in grease. All other hardware is zinc plated/chromate sealed.
Aluminum: Engineered composite compression spring tubes and steel compression springs packed in grease. Type 316 Stainless steel hinges. All other hardware is zinc plated/chromate sealed.
Product Spec Sheet: |
|
Door Size: |
36" wide x 30" high
|
Material: |
Galvanized Steel
|
1.5
