30" x 54" Steel Cover and Frame - Roof Hatch - Ship Stair Access - Miami Dade Approved
Standard Features and Benefits |
|
- Miami-Dade County and Florida Building Commission approval for use in high velocity hurricane zones with large and small missile impac
- Engineered with compression spring operators to provide smooth, easy, one-hand operation, regardless of size
- Automatic hold-open arm locks the cover in the open
position to ensure safe egress
- Overlapping cover design, full welded corners on cover and curb, EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency
- Constructed with corrosion resistant materials to provide many years of trouble free, dependable service
- Heavy gauge construction and positive latching mechanism
maintain building security
- Curb features the Bil-Clip® flashing system, an innovative
method to quickly and easily secure single-ply roofing material to Bilco roof products
- Available in many sizes and curb configurations to satisfy any requirement or installation
*Specify model NB-20HZ or NB-50HZ with two-point latch
|
|
|
|
Guide Specifications
- Material (select one):
Steel: Cover and frame are 14 gauge (2 mm) G-90 paint bond galvanized steel. Aluminum: Cover and frame are 11 gauge (2.3 mm) aluminum. Stainless Steel: Cover and frame are 14 gauge (2 mm) type 304 stainless steel
- Cover: Brakeformed, hollow-metal design with 1" (25 mm) concealed fiberglass insulation, 3" (76 mm) beaded, overlapping flange, fully welded at corners, and internally reinforced for 40 psf (195 kg/m2) live load.
- Curb: 12" (305 mm) in height with integral capflashing, 1" (25 mm) fiberboard insulation, fully welded at corners, and 3-1/2" (89 mm) mounting flange with 7/16" holes (11 mm) provided for securing frame to the roof deck.
- Gasket: Extruded EPDM rubber gasket permanently adhered to cover.
- Hinges: Heavy-duty pintle hinges with 3/8" (9 mm) Type 316 stainless steel hinge pins.
- Latch: Slam latch with interior and exterior turn handles and padlock hasps. (For Type NB-20HZ and NB-50HZ Miami-Dade County approved models: Specify enclosed two-point spring latch with interior and exterior turn handles and padlock hasps)
- Lift Assistance: Compression spring operators enclosed in telescopic tubes. Automatic hold-open arm with grip handle release.
- Finish:
Steel: Alkyd base red oxide primer. Aluminum: Mill Finish. Stainless Steel: Type 304 stainless steel with bead blast finish
- Hardware:
Steel: Engineered composite compression spring tubes and steel compression springs packed in grease. All other hardware is zinc plated/chromate sealed. Aluminum: Engineered composite compression spring tubes and steel compression springs packed in grease.Type 316 Stainless steel hinges. All other hardware is zinc plated/chromate sealed. Stainless Steel: Type 316 stainless steel.
|
Product Spec Sheet: |
|
Door Size: |
36" wide x 30" high
|
See NB-20HZ-30-54 in action on YouTube!