18" x 18" High Security Fire-Rated Insulated Access Door with Flange - Cendrex

PFI-HS-18-18 access door is made with cold rolled steel for the frame and galvanneal steel for the door. It is suitable for high security areas such as jails, correctional facility, laboratories, and more. It also comes with a 2-inch mineral wool for insulation, so you can install this on any fire rated walls or ceilings.

PFI-HS fire rated access door specifications,

Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door

Insulation: 2" mineral wool

Hinge: Continuous piano hinge

Lock / latch: Mortise slam latch with cylinder

Inside panel release: Included on all slam latch fire doors

Automatic panel closer: Standard on all doors

Finish: DuPont high quality white powder coat

Packaging: Individually wrapped, 1 per box

Fire Rating:

For installation in vertical wall assemblies:

Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48" x 48".

Rating 3 hours. Temperature rise: 400°F at 60 mins. Maximum door size of 48" x 48".

For installation in horizontal ceiling assemblies:

With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250°F (139°C) at 30 mins, 450°F (250°C) at 60 mins. Maximum door size of 24" x 36" or 864 sq inches (see note 1)

Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly.

Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10.

MEA # 507-06-M

Fire rated by Intertek - Warnock Hersey  

 LEED Certification:

The PFI access door can contribute directly to a project's ability to achieve LEED certification:

USA

• LEED-NC New Construction & Major Renovations
• LEED for Schools
• LEED-CI Commercial Interiors

CANADA

• LEED Canada-NC New Construction & Major Renovations
• LEED Canada-CI Commercial Interiors

Note 1: Maximum door size 24" x 36" can also be calculated by multiplying the surface area of the door (24"x36"). The maximum surface area is 864 sq inches. The maximum height or width is 36". All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28" x 28" = 784 sq inches.

Note:  Product images shown may not reflect actual size and/or latches.  Please refer to Technical Data Sheet for specific details. 

Product Spec Sheet:
Door Size:	18" wide x 18" high
Material:	Galvannealed Steel and Steel